This skirting board calculator works out how many boards to buy, and it goes one step further than a simple divide and round up. It plans the cuts wall by wall and reuses offcuts on shorter walls, so you get a real cutting list before you order. In the US the same board is called a baseboard, and the calculator covers those lengths too once you switch the units.
Estimates only. Door widths are taken off the longest walls first, which is close enough for a cutting plan because a door opening simply shortens that wall run. Check the stock lengths your supplier actually carries before ordering.
How to use it
- Choose wall by wall if you have each wall measured, or whole room and just enter the length and width.
- Enter the wall lengths, leaving the spare boxes empty. In whole room mode the tool builds the four walls for you.
- Add the number of doors and the door width, so the openings come off the total.
- Pick the stock board length you can buy locally, and a waste allowance: 5 percent for plain rooms, 10 percent for awkward ones.
- Add a price per board if you want a cost, then read the simple count, the cutting plan count and the cutting list.
How the calculation works
The simple count takes your skirting length after the door deductions, adds the waste allowance, divides by the stock board length and rounds up. The cutting plan works the way a careful fitter does. Every wall run longer than a stock board is split into board sized pieces, the pieces are sorted longest first, and each piece is cut from the board with the smallest offcut that still fits it, so short end pieces share boards instead of wasting them.
Worked example. Walls of 4.2 m, 3.6 m, 4.2 m and 3.0 m with one 0.8 m door give 14.2 m of skirting, because the door comes off the longest wall. The simple count adds 10 percent waste and divides by 3 m boards: 15.62 m means 6 boards. The cutting plan packs the same walls into 5 boards with 0.8 m to spare, as the cutting list above shows.
Stock board lengths
| Stock length | Sold in | Suits |
|---|---|---|
| 2.4 m | UK | Small rooms, easy handling |
| 3.0 m | UK | Most rooms, fewer joins |
| 4.2 m | UK | Long walls, fewest joins |
| 8 ft | US | Small rooms and repairs |
| 12 ft | US | Most rooms |
| 16 ft | US | Long walls, needs two people |
Longer boards mean fewer joins and a neater finish, but they are harder to get up stairs and around corners. If your longest wall is up a tight staircase, a shorter stock length with one extra join is often the sensible buy.
Mistakes to avoid
- Measuring over the old skirting or the architrave instead of the bare wall, which shortens every run.
- Forgetting the doors, or taking a door off twice, once inside the wall length and again in the door box.
- Cutting every wall from a fresh board. Offcuts from the long walls usually cover the short run beside a door.
- Buying before the new floor is down. Thicker flooring and underlay raise the finished level and can leave a gap under boards fitted early.
- Ignoring the corners. Mitred joints use a little more length than the wall measures, which is what the waste allowance is there for.
Fitting new flooring as well? The flooring calculator counts packs and adds a simple skirting figure, the room size calculator works out wall and floor areas from your room dimensions, and the paint calculator covers the walls above the new boards.
Common questions
How much skirting board do I need for one room?
Measure each wall, take off the width of every door, then add 5 to 10 percent for cuts and mistakes. A room 4 m by 3.5 m has 15 m of wall, so with one standard door you need about 14.2 m of board before waste is added.
What is the difference between the simple count and the cutting plan?
The simple count divides your total length by the board length and rounds up, which treats every offcut as waste. The cutting plan lays your real wall lengths into stock boards and reuses offcuts on shorter walls, so it often saves a board.
Should skirting boards go on before or after flooring?
Fit them after hard flooring is laid, so the boards sit on the finished floor and cover the expansion gap at the edge. With carpet it works either way round, but boards first means the carpet tucks neatly against them.
Is a baseboard the same as a skirting board?
Yes. Baseboard is the US name for the same board, sold in 8, 12 and 16 ft lengths with the height measured in inches. The maths is identical, so this calculator works for both once you switch the units at the top.
How much extra should I allow for mitred corners?
Every mitre eats a little length, and one miscut eats more. Allow 10 percent on rooms with several corners or a chimney breast, and 5 percent on plain rectangular rooms with a single door.
