Please check your numbers. Lengths need to be above zero, and doors and windows cannot be negative.
Your paint estimate
Estimates only. Real coverage varies with surface texture, colour change and how the paint is applied, so treat this as a buying guide, not an exact promise.
Work out how much paint a room really needs before you buy. Enter the room size, take off doors and windows, choose your coats and paint type, and this paint calculator gives you the litres or gallons to buy, the sensible tin sizes, and an idea of cost.
How to use it
- Measure the room length, width and ceiling height. Use the longest wall if the room is slightly uneven.
- Add the number of doors and windows. A standard door and window area is taken off the wall total for you.
- Tick the surfaces you are painting: walls, ceiling and trim. Tick primer if the surface is bare, stained or changing colour a lot.
- Choose coats and paint type, then read the buying list. Add a paint price if you want a cost estimate too.
How the calculation works
Wall area is the room perimeter times the ceiling height: 2 times (length plus width) times height. The calculator then takes off 1.98 m² (21 sq ft) per door and 1.12 m² (12 sq ft) per window. Ceiling area is simply length times width. The total area is divided by the coverage of your paint type, then multiplied by the number of coats. Trim is worked out from the skirting length plus an allowance per door and window, using gloss coverage, because trim paint covers differently from emulsion.
Worked example: a room 4 m long, 3.5 m wide and 2.4 m high has 36 m² of wall before deductions. One door and two windows take off 4.22 m², leaving 31.78 m² of wall, plus a 14 m² ceiling. At 12 m² per litre over 2 coats, that is 7.63 litres of emulsion, which buys as one 5 litre tin, one 2.5 litre tin and one 1 litre tin.
Typical coverage by paint type
| Paint type | Metric coverage | Imperial coverage | Typical use |
|---|---|---|---|
| Standard emulsion | 12 m² per litre | 400 sq ft per gallon | Walls and ceilings |
| Primer and undercoat | 10 m² per litre | 350 sq ft per gallon | Bare plaster, stains |
| Gloss and satin | 14 m² per litre | 550 sq ft per gallon | Trim and doors |
| Exterior masonry | 5 m² per litre | 180 sq ft per gallon | Outside walls |
Mistakes to avoid
- Buying for one coat when the colour change needs two. Pale paint over a dark wall often needs a primer coat as well.
- Forgetting the ceiling. It is easy to leave out, and it can add a third more paint to the job.
- Trusting the coverage printed on the tin on rough or bare surfaces. Bare plaster and textured walls drink far more paint.
- Buying lots of small tins. One larger tin usually costs less per litre than several small ones.
- Skipping the door and window deduction, then overbuying. On a small room it can be a whole tin of difference.
Painting the room yourself and want the labour side too? Try our cost to paint a room calculator. For floor and tile jobs, start with the room size calculator, and if paper is going up instead of paint, use the wallpaper calculator.
Paint calculator questions
How accurate is this paint calculator?
It follows the standard method decorators use: wall area minus openings, divided by coverage, times coats. Real jobs vary by about 10 to 15 percent because surfaces, colours and application all differ, so the tin combination includes a small sensible margin.
Do I need a primer coat?
Primer helps on bare plaster, bare wood, stained walls and big colour changes, such as white over a deep red. On previously painted walls in good condition with a similar colour, you can usually skip it and go straight to two coats of emulsion.
Why deduct doors and windows?
You do not paint glass or most door faces with wall emulsion, so leaving them in overstates the area. A standard door takes off about 1.98 m² and a standard window about 1.12 m². Very large windows or open plan openings are worth measuring and adjusting for.
How many coats do I need?
Two coats is the normal answer for an even, durable finish. One coat can work for a refresh in the same colour. Three coats, or primer plus two coats, is safer over dark colours, stains or fresh plaster.
What if my room is an odd shape?
Split the room into rectangles in your head, work out the longest perimeter you can, and use the full ceiling height. For L shaped rooms, measure the two halves as separate rectangles and add the wall lengths together before entering them.
