Room Size Calculator


Area 1

Area 2

Area 3

Area 4

Please check your areas. Every area you use needs all of its measurements above zero, and the added areas must come to more than the subtracted ones.

Your room size

Total room size

Use this total wherever a project asks for your floor area: the paint calculator for walls and ceilings, the flooring calculator for packs and boards, and the tile calculator for tiles and grout.

Most home projects start with one number: the size of the room. This room size calculator works out square footage and square metres at the same time, and it handles the shapes real rooms come in: rectangles, L shapes, angled walls and round bays. Add up to four areas, subtract the parts that should not count, and use the total for paint, flooring and tiles.

How to use it

  1. Choose metric or imperial. Imperial measurements can be entered in feet and inches, the way a tape measure reads.
  2. For each part of the room, pick the shape, name it, and enter its measurements.
  3. Set any area that should not count, such as an ensuite footprint or a chimney breast, to subtract.
  4. Add the ceiling height if you also want the room volume, then read the total in both units.

How the calculation works

A rectangle is length times width. An L shape is treated as two rectangles added together. A triangle, which is how an angled wall room works out, is base times height divided by two, where the height is the straight line distance from the base to the far corner, not the angled side. A round area uses the diameter: the radius squared, times pi. Added areas are totalled, subtracted areas are taken away, and the result is shown in square metres and square feet together, using 1 m² equals 10.7639 sq ft. Take that total into the paint calculator, the flooring calculator or the tile calculator when you are ready to buy materials.

Worked example: a main area of 4 m by 3.5 m is 14 m². An L shaped extra of 3 m by 2 m plus 1.5 m by 1 m adds 7.5 m². A triangular alcove with a 2 m base and 1.2 m height subtracts 1.2 m², and a round bay of 2 m diameter adds 3.14 m². The total room size is 23.44 m², which is 252.3 sq ft. With a 2.4 m ceiling, the volume is 56.26 m³, or about 1,987 cubic feet.

How to measure a room properly

Measure at skirting board level, not halfway up the wall, because walls are rarely perfectly straight and the floor is what materials have to cover. Take the longest reading when opposite walls differ slightly. Sketch the room first and write each measurement on the sketch as you go, so nothing is missed. Walk into alcoves, bays and chimney breasts and measure them as their own small areas, then add or subtract them here. For an L shaped room, decide where the two rectangles split and measure each one fully. Finally, measure twice: a 10 cm error on a long wall quietly becomes a whole pack of flooring.

Common room sizes, converted

Room size Area (m²) Area (sq ft)
2.5 m x 3 m 7.5 80.7
3 m x 3 m 9 96.9
3 m x 4 m 12 129.2
3.5 m x 4 m 14 150.7
4 m x 4 m 16 172.2
4 m x 5 m 20 215.3
5 m x 5 m 25 269.1

Mistakes to avoid

  • Measuring at waist height. Walls lean and bow, so floor level readings are the ones that match your flooring.
  • Guessing the odd corners. Angled walls, bays and alcoves are exactly where area estimates go wrong.
  • Forgetting to subtract a big ensuite, airing cupboard or chimney breast, then overbuying materials.
  • Mixing units mid job. Pick metres or feet and inches and stick to one until the total is done.
  • Rounding every wall down. Small roundings compound across a whole room.

Room size questions

How do I work out the square footage of a room?

Multiply the length by the width. A room 12 ft by 10 ft is 120 sq ft. For awkward shapes, split the room into rectangles, triangles or a round section, work each out, then add them together and subtract anything that should not count.

How do I convert square metres to square feet?

Multiply square metres by 10.7639 to get square feet. To go the other way, divide square feet by 10.7639. This calculator always shows both, so you can order materials sold in either unit without converting by hand.

How do I measure an L shaped room?

Split the L into two rectangles along the step in the wall, measure each rectangle, and add the two areas. The L shape option here does exactly that: enter the main part and the extra part and it adds them for you.

Should I subtract areas like an ensuite or chimney breast?

For flooring, tiles and paint quantities, yes. If flooring will not run under it, or the wall area is not being painted, subtracting gives a truer total and stops you overbuying. Estate agents measure rooms differently, so for buying materials your own floor level measurements are the ones to trust.

What about angled walls and sloping ceilings?

An angled wall turns part of the room into a triangle, so use the triangle option with the base along the straight wall and the height measured square across to the far corner. Sloping ceilings do not change the floor area, but they do reduce the true volume, so treat the volume figure as the full height estimate.