This decking calculator counts the boards, joists and screws for a rectangular deck, and it compares up to three stock board lengths side by side so you can see which length wastes least before you buy. Most decks are spring projects and the popular lengths sell out fast, so it is worth running the numbers early in the season.
Estimates only. The count assumes each row starts with fresh boards and offcuts are not reused in the next row, which matches how most decks are laid with staggered joints. Posts, beams and foundations are not included, because they depend on the height of the deck and the ground underneath.
How to use it
- Enter the deck length and width, then choose which way the boards run.
- Check the board width and gap. The defaults suit a standard 145 mm board with a 5 mm gap, or a 5.5 in board with a 0.25 in gap once you switch to imperial.
- Enter up to three stock lengths you can actually buy, and leave a spare box blank if you only have two.
- Set the joist spacing: 400 mm or 16 in for most boards laid straight, closer for diagonal layouts.
- Add a price per board if you want the cost of the best length, then compare the waste on each option.
How the calculation works
The tool first works out how many boards fit across the deck. Each board covers its own width plus one gap, and the count rounds up so the last board still lands inside the deck edge. Every row is then divided by the stock length to give the boards per row, and the waste on each length is the share of what you buy that never ends up on the deck. Joists run under the boards at your spacing with one at each end, and screws are counted at two per board at every joist crossing.
Worked example. A deck 4.8 m long and 3.6 m wide, boards running along the length, takes 25 board rows at 145 mm plus a 5 mm gap. In 4.8 m lengths that is 25 boards with no cutting waste at all. In 3.6 m lengths every row needs two boards, so 50 boards and about a third of the timber bought ends up as offcuts. The joists at 400 mm spacing come to 13, and the screw count is 650.
Boards, gaps and joists at a glance
| Item | Metric | Imperial |
|---|---|---|
| Standard board width | 145 mm | 5.5 in |
| Gap between boards | 5 mm | 0.25 in |
| Joist spacing, straight | 400 mm | 16 in |
| Joist spacing, diagonal | 300 mm | 12 in |
| Common stock lengths | 3.6 to 4.8 m | 8 to 16 ft |
Composite boards often ask for a wider gap and tighter joist spacing than timber, because they expand along their length and flex more. Check the board maker figures before you fix the frame, as they override the standard values in the table.
Mistakes to avoid
- Laying boards tight together. Timber swells when it gets wet, and a deck with no gaps can buckle and hold puddles on the surface.
- Comparing board prices without comparing waste. A cheaper short length can cost more in the end once a third of it is thrown away.
- Spacing the joists too wide to save money. The deck feels springy underfoot and the boards age faster.
- Forgetting the subframe. This tool counts boards, joists and screws, but posts and beams vary with the height of the deck and the ground, so measure the slope and levels before fixing those numbers.
- Counting screws per board instead of per crossing. Every joist crossing takes two screws, and a long deck crosses a lot of joists.
Planning the rest of the garden at the same time? The fence panel calculator counts panels, posts and gravel boards for the boundary, and the room size calculator measures square and L shaped areas indoors.
Common questions
How many decking boards do I need?
It depends on the deck size, the board width and the gap. Each board covers its own width plus one gap across the deck, and the run length decides how many stock boards make up each row, which is exactly what the comparison above works out for you.
What gap should I leave between decking boards?
About 5 mm, or a quarter of an inch, suits standard timber boards. The gap lets rain drain through and gives the wood room to swell in wet weather, and it closes up a little as new boards dry over their first summer.
How far apart should deck joists be?
400 mm, or 16 in, suits most boards laid straight. Drop to 300 mm or 12 in for diagonal layouts, thinner boards or a deck carrying heavy pots and furniture, because wider spacing lets the boards flex.
Which stock board length should I buy?
The one that divides into your row length with the least left over. A length equal to the row, or exactly half of it, wastes nothing on paper, so compare the waste figures in the results rather than going by the price per board alone.
Does this tool include the deck frame and posts?
It includes the joists that sit directly under the boards, counted from your spacing. Posts, beams and foundations depend on the height of the deck and the ground underneath, so they are best worked out once the frame design is fixed.
