Flooring Calculator

This flooring calculator works out the packs to buy for laminate, vinyl plank, engineered wood and solid wood floors across up to three rooms. It adds the right waste for your laying pattern, and can add underlay rolls, skirting boards and a pack cost on top, so the shopping list is complete before you order.




Estimates only. Underlay rolls are counted at 10 m² per roll (about 100 sq ft in the US). Skirting takes off 0.9 m, roughly 3 ft, per door. Check the real pack coverage on the box before ordering, because it varies by product.

How to use it

  1. Measure each room, length by width, and add up to three rooms. Leave the extra room boxes empty if you only have one.
  2. Pick the flooring type. The pack coverage fills in with a typical figure, and you can overwrite it with the exact coverage printed on your box.
  3. Pick the laying pattern, because diagonal and herringbone layouts waste far more material than straight rows.
  4. Tick underlay or skirting if you need them, set the door count for the skirting run, and add a pack price if you want a cost.
  5. Read off the area with waste, the packs to buy and the extras, all rounded up to whole units.

How the calculation works

The tool adds up the floor area of every room, then adds the waste allowance for the pattern: 10 percent for straight rows, 15 percent for diagonal and 20 percent for herringbone, where the angled cuts waste much more of each plank. The total is divided by the pack coverage and rounded up to whole packs. Underlay is counted on the plain floor area, at one roll per 10 square metres. Skirting is the total room perimeter with a door width taken off per door, divided by the board length and rounded up.

Worked example. A room of 4 m by 3.5 m is 14 square metres. With straight laminate at 10 percent waste you need 15.4 square metres of flooring, which is 8 packs at 2.16 square metres per pack. Underlay takes 2 rolls, and the skirting run of 15 m less one door at 0.9 m comes to 6 boards of 2.4 m each. At £25 a pack, the flooring itself costs about £200.

Waste by laying pattern

Pattern Waste Worth knowing
Straight 10% Offcuts start the next row
Diagonal 15% Every edge plank is cut at an angle
Herringbone 20% Most cuts, most waste, slowest to lay

Rooms with alcoves, bays or a lot of doorways waste more than the table suggests, because every obstruction adds cuts. If your room is an awkward shape, pick the next waste step up and save yourself a second trip to the shop.

Mistakes to avoid

  • Measuring inside the skirting. Measure wall to wall and let the waste allowance cover the edges, or the last row comes up short.
  • Trusting a generic pack size. Coverage per pack varies a lot between products, so type in the figure from your actual box.
  • Forgetting underlay. Laminate and most click vinyl need it, and the floor feels hollow and wears faster without it.
  • Buying packs weeks apart. Colour and click profiles vary between batches, so buy everything, plus your spare pack, in one order.
  • Skipping acclimatisation. Wood and laminate need a day or two in the room before laying, or gaps and lifting follow later.

Not sure of the room area on its own? The room size calculator gives floor and wall areas, the tile calculator handles tiled floors tile by tile, and the skirting board calculator works out cutting lists board by board.

Common questions

How much extra flooring should I buy for waste?

Add 10 percent for a straight layout, 15 percent for diagonal and 20 percent for herringbone. Awkward rooms with bays, alcoves or several doorways sit at the top of that range, so round up a step if your room is far from a plain rectangle.

Does laminate flooring need underlay?

Yes, in almost every case. Underlay cushions the floor, quietens footfall and protects the click joints, and some products have it pre attached to the plank. Check the pack: if the planks have no backing layer, you need a separate underlay roll.

Can this calculator work out floor tiles?

Tiles are counted individually rather than by area packs, because the tile size and grout gap change the count. Pick floor tiles in the type list and the tool points you to the tile calculator, which gives tiles, boxes, grout and adhesive.

How many packs do I need for a 4 by 4 metre room?

The room is 16 square metres, and with 10 percent waste for a straight layout you need 17.6 square metres of flooring. At 2.16 square metres per pack that is 9 packs, plus underlay at 2 rolls if the planks need it.

Should I buy all the packs from the same batch?

Yes. Shade, finish and even the click profile can vary slightly between production batches, and a mixed floor shows it under window light. Order everything at once, and check the batch numbers match when the packs arrive.