Curtain Size Calculator

Too narrow and curtains look mean, too short and the room looks unfinished. This curtain size calculator turns your window and pole measurements into the flat width each curtain needs, the ready-made size to buy, and the fabric amount if you are making your own.




Leave at 0 and the tool adds a 17.5 cm overhang each side of the window, the usual fitting allowance.


Guidance: eyelet curtains usually need 1.5 to 2 times the pole length, pinch pleats 2 to 2.5 times.



Eyelet curtains are measured from the top of the pole, so the tool adds a small allowance above it.




Ready-made size to buy

Standard sizes vary a little between shops, and fabric shrinks slightly on some materials. If your result sits between two sizes, most people size up on width for a fuller look.

How to use it

  1. Measure the window width, then your pole or track length if it is already fitted.
  2. Pick your gather. More fullness means softer, deeper folds and more fabric.
  3. Measure from the top of the pole or track down to the floor or the sill.
  4. Choose the finished style and read off the size to buy, or the fabric to order.

How the calculation works

Curtains are sold by their flat, ungathered width. The fabric width you need is the pole or track length multiplied by the fullness: 1.5 times gives a light gather, 2 times is the standard most people picture, and 2.5 times gives deep, formal folds. Divide that total by the number of curtains to get the flat width of each one, then round up to the nearest standard ready-made width. For length, the tool starts from your pole to floor or pole to sill measurement and adjusts for the style: a small clearance so floor length curtains skim rather than drag, an extra allowance below the sill for apron length, and extra fabric for a puddle. Eyelet headings get a small addition because the fabric sits above the pole. If you are sewing, fabric comes in a standard 137 cm (54 in) width, so the tool counts how many widths you need and adds hem and heading allowance to each length.

Worked example: a 180 cm window with the pole fitted 17.5 cm past each side gives a 215 cm pole. At 2 times fullness a pair needs 430 cm of flat fabric, so 215 cm per curtain, which rounds up to the standard 229 cm width. A 230 cm pole to floor measure at floor length gives a 229 cm drop, so you buy a pair at 229 cm by 229 cm.

Standard ready-made curtain sizes

Size (per curtain) UK (cm) US (inches)
Widths 117, 168, 229 46, 66, 90, 108
Drops / lengths 137, 183, 229, 274 54, 72, 84, 96, 108
Fabric width (on the roll) 137 cm 54 in

Sizes are quoted per curtain, width first then drop. A pair in 229 cm width means each of the two curtains is 229 cm wide when laid flat.

Mistakes to avoid

  • Measuring the window instead of the pole. Curtains hang from the pole or track, which is wider than the glass.
  • Forgetting fullness. A curtain the same width as the pole hangs flat with no folds and looks like a sheet.
  • Measuring eyelet drops from the middle of the pole. Eyelets are measured from the very top of the pole.
  • Ignoring radiators under the window. Sill or apron length usually works better than fabric resting on a hot radiator.
  • Buying the exact drop with no clearance. Floors are rarely level, so floor length curtains need a small gap.

Finish the room

Working through the whole window wall? Our wallpaper calculator counts the rolls for the walls around it, and the rug size calculator helps you anchor the seating area underneath.

Questions people ask

How much wider than the window should curtains be?

The fabric itself should total 1.5 to 2.5 times the pole or track length, depending on the heading and how full you want the folds. The pole should also extend about 15 to 20 cm past the window on each side so the open curtains clear the glass.

Should curtains touch the floor?

Most floor length curtains look best skimming the floor with about 1 cm of clearance, which also keeps hems cleaner. A puddle style deliberately adds 10 to 20 cm so fabric rests on the floor, which suits formal rooms but gathers dust.

How do I measure for eyelet curtains?

Measure the pole length for width, and for the drop measure from the very top of the pole, because the eyelet sits in the fabric above the pole itself. This calculator adds that small allowance automatically when you choose the eyelet heading.

What if my size falls between two standard sizes?

Size up on width for a fuller gather, since extra width simply makes deeper folds. For drop, size up if you prefer a puddle or can hem them, and size down if a radiator or sill sits in the way.

How much fabric do I need to make my own curtains?

Divide the total flat width you need by the fabric width, usually 137 cm or 54 in, and round up to whole widths. Multiply the widths by your finished drop plus about 25 cm (10 in) per length for hems and the heading.